关于移动信道分析模型的研究

移动信道特性的研究是移动通信系统研究领域中最重要的部分，也是近年来研究的热点之一。其中多径传播和阴影效应是信道的主要特点，几乎任何统计特性都建立在此基础上。主要是介绍一种移动信道的分析模型，该模型的地理环境为市区，即移动台和基站之间不存在直视波（LOS），并从多普勒功率谱的角度给出了接受信号振幅和相位的概率密度函数（PDF）盈自相关和互相关函数。     

塔里木山前复杂地层钻头使用技术

利用测井资料结合实测的岩石力学性质、邻井的岩性剖面建立了岩石力学参数模型,综合解释了单井岩石在纵向剖面上的力学性质。借鉴邻井钻头使用情况,以推广高效PDC钻头为主,介绍了山前构造钻头选型情况。针对山前构造的地层岩性特征,从复合片、刀翼形状、齿型、切削齿力平衡等方面设计和改进了PDC钻头。改进后的钻头使塔里木山前复杂地层钻头使用获得了突破性进展。     

Decision Support System for Stakeholder Involvement

Stakeholder involvement is essential to the development of a total maximum daily load (TMDL) and its implementation plan. A tool, beyond a simulation model, is needed to support the decision making process that requires negotiation and compromise among stakeholders. The decision support system (DSS) described herein has a TMDL module to calculate various combinations of point and nonpoint loads that can meet the water quality criteria. Its Consensus module allows stakeholders to formulate, evaluate, modify, and vote for alternatives. The DSS displays bar charts for pollution loads from various subwatersheds and attributes the nonpoint loads to land uses. The water quality consequence of the pollution loads is output in maps, which shows sections meeting criteria in green and those not in red. The DSS requires a front end effort of site specific adaptation and model calibration. An Internet-based stakeholder process was developed to allow more concerned citizens to participate in management decisions.     

用Boltzmann网络解任务安排问题

本文提出了一种解任务安排问题的Ｂｏｌｔｚｍａｎｎ网络算法，已在Ｔｒａｎｓｐｕｔｅｒ多处理机系统上并行模拟实现，该算法具有优化程度高，运算速度快等特点．     

Optimal task allocation in hypercube multiprocessor ensembles

Criteria are established to determine the optimal policy for allocating a set of uniform tasks onto a multiprocessor hypercube ensemble. It is shown that the optimal policy depends on the ratio of computation to intertask communication required by the distributed program, and that based on this ratio, tasks should be placed either all on one processor or uniformly distributed over the largest possible hypercube.     

SDH中泊松分布下误块率与误码率的关系分析

本文较详细地介绍了ＳＤＨ中的ＢＩＰ误码校验方式，推导了泊松分布下，ＢＩＰ误块率与误码率的一般关系式，给出了ＳＤＨ中几种典型的误块率与误码率的关系曲线，并做了计算机模拟验证     

Performance of in-call buffer/window allocation schemes for short intermittent file transfers over broadband packet networks

While static open loop rate controls may be adequate for handling continuous bit rate (CBR) traffic, relatively smooth data traffic, and relatively low speed bursty data traffic over broadband integrated networks, high speed bursty data sources need more dynamic controls. Burst level resource allocation is one such dynamic control. Potential benefits and other issues for burst level resource parameter negotiations for bursty data traffic over high speed wide area packet networks have been discussed earlier.^1–6 A detailed analysis of an adaptive buffer/window negotiation scheme for long file transfers using these concepts is presented in Reference 1. In this paper we discuss two burst level buffer/window negotiation schemes for short intermittent file transfers, focusing on the specific needs of such traffic streams. We develop closed network of queues models to reflect the behaviour of the proposed schemes. These models, while being simple, capture essential details of the control schemes. Under fairly general assumptions, the resulting network of queues is of product form and can be analysed using the mean value analysis. We use such an analysis to compare the proposed schemes and to determine appropriate sizes of trunk buffers to achieve the desired balance between bandwidth utilization and file transfer delay. The effects of other parameters on the performance of these schemes as well as on the buffer sizing rules are also discussed. Burst level (in-call) parameter negotiation may be carried out by the end system with the network elements or by an interface system (access controller) with the broadband network elements. We discuss implications of this location as well as the needed protocol features. Finally, the service discrimination capabilities desired at the trunk controllers in switching nodes are briefly discussed.     

基于小波基优化和动态比特分配的数字音频压缩编码方案

提出了一种新颖的基于自适应小波基优化选择和心理声学模型相结合的数字音频信号的透明质量编码方法，保证固定失真水平上使每帧信号的变换系数的动态分配的比特数最少，并且利用动态码本的方法来消除音频信号的统计冗余，进一步压缩比特率，对于抽样率为４４．１ｋＨｚ每样值用１６比特线性码表示的光盘单声道音乐信号可以压缩到６４ｋＢＰＳ左右。     

浅谈机械化施工的组织管理与设备调配

结合公路机械化施工的意义和作用，介绍了施工机械调配的基本要求，阐述了机械设备的运行规律及其调配原则，提出了主导机械的调配方法及相关注意事项。     

牙轮钻头压力补偿系统的发展

钻头轴承的寿命不仅取决于轴承材质，更取决于工作环境。密封圈的作用是将泥浆隔离在轴承腔之外，使轴承能工作在一个良好环境中。轴承失效的主要原因是密封圈先期失效，密封圈失效除其自身质量外，主要与密封圈两侧的压差有关，过大的压差是造成密封圈失效的主要原因。介绍了减小压差的压力补偿系统结构的发展。